This double-station pneumatic heat press is built for transfer work that needs air-powered downward pressing, digital control, and a 16 20 in work area. The swing-head position-limit magnetic sensor lets the head press down when rotated to the zero position; an air compressor is required and not included.Type: pneumatic swing-head heat press machine with dual stations, connected sliding track, parallel left and right bearings, and improved lower support plate for easier finished-clothes loading.Controls: full digital integrated display, large wide-angle LCD, multiple time settings, completion signal, and 1-99 sec delaying time.Heat and pressure: integrated heating tube and plate for short heating time, durable use, and even temperature; Teflon-sprayed upper plate; lower plate with 6 mm silicon mat and 1 cm sponge; self-pressure balancing; pressure up to 8 kg/cm, generally 0.4-0.6 MPa, with 6 cm adjustment range.Electrical and size: 110V/60Hz, 2 kW, 0-299C range; blue and grey aluminum; heat plate 16 20 in (40 50 cm); accepts items up to 2.36 in thick; packing size 51.2 20.9 23.6 in; made in China.Applications: cotton, polyester, fiber, pearl board, metal pendant, mousepad, vitrolite, and ceramics; optional infrared positioning is listed for more accurate small-item printing.Guide settings: cotton 15-25 sec at 356-428F (180-220C); polyester 40 sec at 356F (180C); fiber 10-40 sec at 302-356F (150-180C); pearl board 60-100 sec at 356F (180C); metal pendant 60 sec at 356F (180C); mousepad 50 sec at 374F (190C); vitrolite 180 sec at 392F (200C); key ring pendant 356F (180C); ceramics 180 sec at 356-428F (180-220C).Remark: additional accessories are intended for replacement and should be stored or maintained appropriately; listed support is lifetime factory online service.Use this 16 20 heat press for T shirt transfer work, garment loading, mousepad printing, ceramic transfers, and small hard-item positioning when configured with optional infrared positioning.